Flexible carbon fiber sheets are thin carbon composite laminates commonly used as
surface veneers or cosmetic skins. They are also referred to as
carbon fiber veneer sheets or carbon fiber skin laminates.
These materials are designed for surface finishing and conformal installation,
rather than for primary load-bearing structures. Compared with rigid carbon fiber plates,
flexible sheets are easier to apply on curved surfaces, wrapped edges,
and complex geometries where rigid laminates are difficult to fit.
Technical Note
In this context, “flexible” refers to formability during installation.
Flexible carbon fiber sheets are designed to conform to surfaces when bonded to a substrate.
They are not intended for repeated or dynamic flexing during service life,
and should not be treated as elastomeric or rubber-based materials.
These are genuine carbon fiber laminates, not vinyl wrap films.
If you are evaluating flexible carbon fiber sheets for a curved or decorative application,
share your project details with our team for a technical review.
Technical Note
As laminate thickness increases, formability decreases and the sheet gradually behaves closer to a rigid carbon fiber plate.
Thickness selection should be evaluated together with surface geometry and installation method.
For applications requiring structural stiffness or load-bearing capability, rigid carbon fiber sheets should be considered instead.
Standard Sheet Sizes and Custom Dimensions
Regular Stock Sizes
300 × 200 mm
500 × 400 mm
500 × 500 mm
900 × 600 mm
1000 × 600 mm
Custom Size Support
Custom dimensions can be supplied based on project requirements.
Sheets may be cut to size or prepared for further processing depending on the application.
Adhesive Backing Options
Self-adhesive backing can be provided upon request.
Adhesive backing must be confirmed before order placement.
If no adhesive requirement is specified, sheets will be supplied as standard non-adhesive flexible carbon fiber sheets.
Technical Note
Adhesive-backed options should be selected based on substrate material, surface condition, and application environment.
Providing this information in advance helps ensure proper material selection and bonding performance.
CNC Cutting and File Requirements
CNC Cutting Capability
CNC cutting services are available for flexible carbon fiber sheets. This is suitable for decorative profiles,
trim components, and repeatable production shapes.
Accepted File Formats
DXF (preferred)
DWG
PDF (reference or simple geometries)
Technical Note
For precise shapes and consistent edge quality, CNC cutting is recommended.
Manual trimming is possible for thinner veneers where high precision is not required.
Appropriate dust control and personal protective equipment should be used during cutting or sanding operations.
MOQ and Lead Time
MOQ: No minimum order quantity (samples, prototypes, and small batches supported)
Lead time: Standard ~7 days; expedited as fast as 3 days subject to availability
CNC cutting requirement (yes / no) and file format
FAQ
No. These sheets are intended as surface veneers or decorative laminates. They are not designed for primary load-bearing applications.
If your part requires stiffness or structural performance, rigid carbon fiber plates should be considered.
“Flexible” refers to formability during installation while bonding to a substrate.
These laminates are not intended for repeated flexing or dynamic bending during service life.
Most projects use 0.20 mm to 0.30 mm. This range typically balances surface conformity on curves with handling stability during installation.
Yes—thin veneer ranges (e.g., 0.20–0.25 mm) are generally selected for tighter curves and wrapped edges.
Final suitability depends on the specific geometry and installation method, so sharing your part details helps confirm selection.
No. Adhesive backing is optional and must be confirmed before ordering. If not specified, sheets are supplied as standard non-adhesive veneers.
Yes, CNC cutting is available for repeatable shapes and consistent edge quality. DXF is preferred; DWG and PDF can also be used depending on geometry.
Standard lead time is approximately 7 days. Expedited orders may ship within 3 days subject to material availability.
